January 2021

Talk: Digitale Fertigung zwischen Erwartung und Ergebnis

Oliver Tessin will talk live at the STUDIO Bund conference at the BAU21 about our Zukunft BAU research project “Facade of the Future Deutsches Museum”. Take a look what Oliver and other speakers have to say to the conference's topic "Digital Planning, Construction and Operation between Innovation and Practice".

More information via these links: Program, Live Stream
Watch the recording here: Link.

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

December 2020

ADDITIVE FERTIGUNG IM INDUSTRIELLEM MAßSTAB

Our partner Hans Weber got pulished on plastverarbeiter.de
The article features an interior wall panel designed by 3F Studio and printed on a Hans Weber printer. Read more about the future of large additive manufacturing and the engineering behind it at the link below.

Read it here in German: Link

© Hans Weber

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

November 2020

Interview: 3D printing in Architecture & Design

Dr. Moritz Mungenast was interviewed by Yasmine Mahmoudieh for her new interview series Impact Design. Take a look what Moritz has to say about our work with 3D printing and recycled materials.

Watch it here: Link

© Yasmine Mahmoudieh

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

November 2020

Talk: ELEMENTE materialFORUM in Berlin

Oliver Tessin will talk about our Zukunft BAU research project “Facade of the Future Deutsches Museum” at the ELEMENTE materialFORUM. The talk is acompanied by a digital exhibition and the display of one of our big facade panels, which you’re welcome to visit in Berlin.

More information via the link.

© ELEMENTE MATERIALFORUM

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

June 2020

FAZ - The long road to a printed home

Moritz Mungenast was recently interviewed by the Frankfurter Allgemeine Newspaper (FAZ) - read what he had to say about 3D printing - sustainable materials, efficient buildings, novel design.

Read it here in German: Link
Translated to English: Link

© Frankfurter Allgemeine Zeitung GmbH

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

May 2020

Architektur + Technik - Historical with a digital extensioN

Oliver Tessin was interviewed by Architektur + Technik magazine - read how he discusses his approach utilising Computational Design Methods and 3D Printing for the „Deutsches Museum Facade“ project.

Read it here in German: Link
Translated to English: Link

© BL Verlag AG

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

February 2020

Talk: Alumni-Vortrag

On February 26, Oliver Tessin held a talk at his Alma Marta University, the HTW Saar about his work with Computational Design methods and Additive Manufacturing.

More information via the link.

© htw saar

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

January 2020

DBZ - Digitalisierung

In their January issue, the Deutsche Bau Zeitschrift (DBZ) published an insightful article about 3F Studio and our approach to enable novel architecture with Computational Design and Additive Manufacturing.

Read it here: Link

© Bauverlag BV GmbH

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

December 2019

TALK: BE-AM

Watch 3F Studio Founders Moritz Mungenast and Oliver Tessin talk at the BE-AM 2019 | Built Environment – Additive Manufacturing symposium at this year’s Formnext in Frankfurt.

Watch the presentation: Youtube
Also take a look at the brochure: Link

© 3F Studio

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

November 2019

Talk: DESIGN FOR 3D-PRINTING

On November 20, 2019, Moritz Mungenast and Oliver Tessin will talk at the symposium BE-AM | Built Environment – Additive Manufacturing at this year’s Formnext in Frankfurt.

More information via the link.

© DDU — Digital Design Unit.

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

November 2019

Talk: ELEMENTE materialFORUM in Berlin

Oliver Tessin will talk about computational design methods with additive manufacturing derived by nature used for the projects “Deutsches Museum” and “Cellular Retable Sculpture” at the ELEMENTE materialFORUM.

More information via the link.

© ELEMENTE MATERIALFORUM

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

October 2019

Talk: Rosenheimer Fenstertage

On October 10, Moritz Mungenast held a talk at the 47. Rosenheimer Fenstertage "Windows for the future – smart, practical, climate-friendly". Talking about sustainable 3d printed architecture and future challenges of the facade industry.

More information via the link.

© ift Rosenheim GmbH

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

October 2019

BAUNETZ_WISSEN_

Our "Deutsches Museum" project has been featured on Baunetz Wissen.

More information via the link.

© 3F Studio

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

August 2019

Talk: 3F STudio @ Colab Dubai

3F Studio held a presentation on 3D printed performative architecture at Colab in the Dubai Design District. We showed the possibilities of Computational Design and 3D Printing with our concepts for architecture, interior and furniture design. Thanks a lot to everyone who joined the event.

© Colab

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

July 2019

VITSOE TALK: Build and burn?

"Temporary brand architecture. A modest past, a wasteful present, and systems that inspire rethinking for the future."

Moritz Mungenast spoke together with Christian Lungershausen and Nicol Puchner about temporary brand architecture and long-term strategies and solutions for a better future in brand architecture.

© Vitsœ

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

July 2019

All structural-physical tests approved!

Detail has published an article about the project status of our 3d printed facade. Take a look at the link below:

Detail.de

© Screenshots from: detail.de

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

July 2019

From Research to Reality

We had a great interview with Archipreneur. Read it in their latest Issue.

More information via the link.

© Archipreneur

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

June 2019

Bauwelt PRAXIS

Our "Deutsches Museum" project has been featured in the Bauwelt magazine 11.2019.

More information via the link.

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

March 2019

Deutsches Museum On Archdaily and Designboom

Our "Deutsches Museum" project got published on Archdaily and Designboom. Take a look at the two articles:

ArchDaily
Designboom

© Screenshots from: archdaily.com & designboom.com

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

January 2019

"Lohnenswertes Wagnis"

A report of our 3d printed facade for the "Deutsches Museum" got published by the Süddeutsche Zeitung. Read it at the link below.

More information via the link.

© Screenshot from: sueddeutsche.de

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

January 2019

Press release of Deutsches Museum

The Deutsches Museum in Munich announced on 16 January 2019, in conjunction with the unanimous approval of the Munich Urban Design Committee, our 3d-printed facade proposal for its interim entrance building. 3F Studio works with Architekten Schmidt-Schicketanz und Partner GmbH and David Wolfertstetter Architektur who are responsible for the planning of the entrance building behind the facade.

More information via the link.
© Visualisation: nuur.nu

"The gateway to the future"

3F Studio has designed a 3D-printed facade destined to serve as the new entrance of the Deutsches Museum in Munich. The design originates from the research project Fluid Morphology, a multifunctional, translucent 3D printed facade application, developed at the Associate Professorship of Architectural Design and Building Envelope at the Technical University of Munich (TUM), and specialises in 3D Printed performative architecture and design. The computational-based design process allows for “environmentally informed architectural design” and integrates functions such as ventilation, insulation, and shading already integrated into the new facade.

More information via the link.
© Visualisation: nuur.nu

January 2019

3F Studio @ BAU 2019

3F Studio was nominated by Detail's Digital Village to participate at this years BAU, world's leading trade fair for architecture, materials and building systems in Munich. We had many high-quality conversations and received a good feedback on our facade system and computational design approach. We thank everybody for their support and are already looking for the next BAU 2021.

More information via the link.
© Photographs: Yury Soldatov

January 2019

3F Studio @ BAU 2019

3F Studio was nominated by Detail's Digital Village to participate at this years BAU, world's leading trade fair for architecture, materials and systems in Munich. We had many high quality conversations and received a good feedback on our façade system and computational design aproach. We thank everybody for their support and are already looking for the next BAU 2021.

More information via the link.

HeadNulla vitae elit libero, a pharetra augue. Duis mollis, est non commodo luctus, nisi erat porttitor ligula, eget lacinia odio sem nec elit. Pus sit amet fermentum. Donec id elit non mi porta gravida at eget metus. Etiam porta sem malesuada magna mollis euismod.ing

Joshua Home

New York Times

HeadNulla vitae elit libero, a pharetra augue. Duis mollis, est non commodo luctus, nisi erat porttitor ligula, eget lacinia odio sem nec elit. Pus sit amet fermentum. Donec id elit non mi porta gravida at eget metus. Etiam porta sem malesuada magna mollis euismod.ing

Nulla vitae elit libero, a pharetra augue.

New York Times